Search Catalog

Cummins Celect Plus ECM: N14, M11 and L10 Guide

Cummins, , 3 min read

Cummins Celect Plus ECM: N14, M11 and L10 Guide

The Cummins Celect Plus ECM ran the N14, M11 and L10 engines from about 1996 to 2001. Thousands of these engines are still working in trucks, dump trucks and equipment, and their ECMs are now more than 20 years old.

This guide explains the Celect Plus ECM, how to tell it from the original Celect, the part numbers we see most, common problems, and Celect Plus ECM repair and programming.

About the Cummins Celect Plus ECM

Celect Plus was the second generation of Cummins’ electronic control for the N14, M11 and L10. It replaced the original Celect in the mid-1990s and added more memory, more programmable features, better trip data and improved diagnostics.

The ECM controls the electronic unit injectors, engine speed, road speed, cruise and engine protection. It is mounted on the side of the engine block. For general engine information, see cummins.com.

Celect vs Celect Plus

Celect Celect Plus
Approx. years 1990-1996 1996-2001
Engines N14, M11, L10 N14, M11, L10
Example part numbers 3084473, 3619037, 3618046 3408300, 3408303, 3096662

The two are not interchangeable. Check the part number on the label. Our guide to the Cummins Celect ECM covers the earlier unit.

Celect Plus ECM part numbers

  • 3408300: N14, M11, L10, 1996-2001.
  • 3408303: N14, M11, L10, 1996-2001.
  • 3096662: N14, M11, L10, 1996-2001.

There are various interchanges. Send us the number on your label and we will confirm. See our ECM part number guide.

Common Celect Plus ECM problems

  • Intermittent stalling from cracked solder joints after years of vibration.
  • Crank, no start from failed injector driver or power supply circuits.
  • Corroded connector pins and hardened seals that let water in.
  • No communication with diagnostic tools.
  • Lost settings or trip data.

Check batteries, grounds and connectors first. N14 Celect Plus ECM faults often turn out to be corroded harness connectors on the engine side.

Celect Plus ECM repair and programming

On our price list (November 2026), Celect Plus ECM repair costs $499.99, with a 1-year warranty. Repair keeps your original programming, which matters on older engines where matching software can be hard to find.

If the unit cannot be repaired, our remanufactured Celect Plus ECMs (3408300, 3408303 and 3096662) cost $1,999 with a $200 refundable core and are programmable to your engine. See N14, M11 and L10 ECMs.

For tuning and rating changes on these engines, see Cummins ECM tuning.

Celect Plus programming features

Celect Plus added more customer-programmable features than the original Celect: road speed and cruise limits, idle shutdown, gear-down protection and better trip data. When you buy a remanufactured Celect Plus ECM, tell us the settings you want, or ask for factory settings, and we program the unit before it ships.

If your original Celect Plus is repaired instead, all of those settings stay exactly as they were, which is one more reason repair is usually the first choice.

Finding a replacement in the future

Celect Plus units are no longer made new, and good used ones are getting harder to find. Keeping your original running with a repair, and keeping a note of its part number and calibration, is the most reliable way to keep an N14, M11 or L10 on the road for years to come.

Frequently asked questions

What years use the Celect Plus ECM?

About 1996 to 2001 on N14, M11 and L10 engines.

Can a Celect ECM replace a Celect Plus?

No. They are different generations with different hardware and software.

How much is Celect Plus ECM repair?

$499.99 on our price list, with a 1-year warranty.

Does a remanufactured Celect Plus need programming?

Yes, to your engine. Ours are programmed before they ship.

Keep your N14, M11 or L10 running

Call 726-999-0231 or contact us with your Celect Plus part number.

See all ECM guides

Not sure which ECM you need?

Send us your engine model and serial number, or the part number on your ECM, and we'll tell you whether to repair or replace it, and what it costs.