The Cummins ISM ECM runs the 10.8 to 11 liter ISM engine found in vocational trucks, buses, regional tractors and fire apparatus. Over the ISM’s life, Cummins used several engine computers, and knowing which one you have is the first step to a fast repair.
This guide covers the ISM engine and its ECMs, the CM570, CM870, CM875 and CM876 modules, Cummins ISM ECM part numbers, common problems and our ISM ECM repair service.
In this guide
About the Cummins ISM ECM
The ISM is the mid-size member of Cummins’ heavy-duty family, sitting between the ISL and the ISX. It is mounted on the side of the engine block, like most Cummins truck ECMs, and controls fuel injection, engine speed, protection and, on later engines, the turbo and EGR systems.
Because the ISM shared electronics with the ISX in each generation, the same module families appear on both engines, with different calibrations.
CM570, CM870, CM875 and CM876
| Module | Typical ISM years (approx.) |
|---|---|
| CM570 | 1999-2002 |
| CM870 | 1999-2006 |
| CM875 | 2003-2006 |
| CM876 | 2007-2009 |
Years overlap and depend on the application. The module name is printed on the ECM label; check it rather than relying on the truck’s model year.

Cummins ISM ECM part numbers
Part numbers on our ISM repair listings (November 2026) include:
- CM570: 3681404, 3681405, 3680509.
- CM870 / CM875 / CM876: 3682729, 3683289, 3684009, 3684275.
The Cummins ISM ECM part number is a seven-digit number on the label. Our ECM part number guide explains more, and the Cummins ECM guide covers other Cummins units.
Common ISM ECM problems
- Crank, no start because injectors are not commanded.
- A dead cylinder from a failed injector driver.
- Intermittent stalling from cracked solder joints.
- No communication with the diagnostic tool.
- Corroded connectors, common on buses and vocational trucks that are washed often.
Check batteries, grounds and connectors first. Our list of faulty Cummins ECM symptoms shows the quick checks.
Cummins ISM ECM repair
On our price list (November 2026), ISM ECM repair costs $399.99 for CM570 units and $399.99 for CM870, CM875 and CM876 units, each with a 1-year warranty. Most repairs are done in 1 to 3 days after arrival.
The repair keeps your calibration and settings, so the ECM goes back on plug and play. If our bench test finds no fault, you pay only the $149 diagnostic fee. See Cummins ECM repair for the full process.
Notes for fleets and fire departments
ISM engines often work in fleets where downtime affects service: buses, refuse trucks and fire apparatus. Keep a record of each ECM part number and engine serial number, and consider a repaired spare ECM for your most common configuration so a swap takes under an hour.
What to include when you ship
A short note in the box speeds everything up. Include your name, phone number and return address, the engine serial number, the part number from the label, the symptoms and any fault codes with how often they occurred. Tell us if the truck was jump-started, welded on, washed or driven through deep water just before the problem started; that often points straight to the failed circuit.
Pack the module in a strong box with padding on every side, and cover the connectors so the pins cannot bend. Ship it with tracking, and use overnight service if the truck is down.
Frequently asked questions
Where is the ECM on a Cummins ISM?
On the side of the engine block, mounted on rubber isolators.
Is the ISM ECM the same as the ISX ECM?
They share module families, such as the CM870, but use different calibrations.
How much does ISM ECM repair cost?
$399.99 on our price list, with a 1-year warranty.
Does a repaired ISM ECM need programming?
No, in most cases. Your calibration stays in the unit.
Send us your ISM ECM
Call 726-999-0231 or contact us with the module name and part number. Official Cummins information is at cummins.com.