Search Catalog

Cummins ECM Guide: Models, Part Numbers and Common Problems

Cummins, , 3 min read

Cummins ECM Repair ISX/ISM

The Cummins ECM on your engine depends on the engine model and year. A Celect from the early 1990s, a Celect Plus N14, a CM870 on an ISX and a Dodge 5.9 module are all engine computers from the same maker, but none of them interchange.

This guide explains the main models, how to find your Cummins ECM part number, the Cummins ECM location, common problems, 6 essential facts before a repair and current repair prices.

Cummins ECM models by engine

ECM Engines Approx. years
Celect N14, M11, L10 1990-1996
Celect Plus N14, M11, L10 1996-2001
CM570 ISX, ISM about 1999-2002
CM870 / CM871 / CM875 / CM876 ISX, ISM about 2002-2010
Dodge 5.9 24-valve modules 5.9 ISB in Dodge Ram 1998-2007

Years are approximate and vary by application. The label on your own unit is what counts. Guides for each: Celect, Celect Plus, ISX, ISM and Dodge Cummins.

Finding your Cummins ECM part number

The part number is printed on the label on the module, usually a seven-digit number such as 3408303 (Celect Plus), 3681404 (CM570) or 3942336 (Dodge 5.9). The label may also show the module name (for example CM870) and a serial number.

Photograph the label before you remove the ECM. Our ECM part number guide lists common Cummins part numbers, and our page on finding your engine serial number shows where the engine data plate is.

Cummins ECM location

On most Cummins truck engines the ECM is mounted on the side of the engine block, on the opposite side from the exhaust, held by bolts with rubber isolators. On the Dodge 5.9, it sits on the driver’s side of the engine block.

Some newer ECMs are fuel-cooled through a plate behind the module. Plug the fuel lines when you remove it.

Common problems

  • Crank, no start because the ECM does not fire the injectors.
  • Stalling or cutting out, often from cracked solder joints.
  • A dead cylinder from a failed injector driver circuit.
  • No communication with diagnostic tools.
  • Corroded connectors on older Celect-family units.

Read faulty Cummins ECM symptoms for the checks to do first.

6 essential facts before a repair

  1. Rule out batteries, grounds and wiring first.
  2. Match the part number, not just the engine model.
  3. A repair keeps your original programming.
  4. A replacement must be programmed to your engine serial number.
  5. Older Celect units are best repaired: replacements are getting scarce.
  6. If the unit tests good, you only pay the $149 diagnostic fee.

Repair prices

On our price list (November 2026):

  • ISX and ISM (CM570, CM870, CM871, CM875, CM876): $399.99.
  • Dodge 5.9 (1998-2002 and 2003-2007): $399.99.
  • Celect and Celect Plus (N14, M11, L10): $499.99.

Every repair has a 1-year warranty. Remanufactured replacements run $1,800 (Dodge 5.9) to $1,999 (Celect and Celect Plus) plus a refundable core. See all Cummins ECMs and Cummins ECM repair.

Which engines use which module

The heavy-duty N14, M11 and L10 shared the Celect and later Celect Plus systems through the 1990s. The ISX and ISM moved to the CM570 around the turn of the century, then to the CM870 family as emissions rules tightened, and to the CM871, CM875 and CM876 later in the 2000s. Pickup trucks with the 5.9 used their own modules, matched to the Dodge Ram.

Because each family has its own hardware and software, a unit that plugs in is not necessarily one that will run your engine. Matching the part number and programming the unit to your engine serial number are what make a replacement work. Repairing your original avoids both steps.

Frequently asked questions

Where is the ECM on a Cummins engine?

Usually on the side of the engine block, mounted on rubber isolators.

How do I find my Cummins ECM part number?

It is on the label on the ECM housing. Photograph it before removing the unit.

Are Cummins ECMs interchangeable?

Only between matching part numbers, and replacements must be programmed to your engine.

Can a Cummins ECM be repaired?

Most can. We repair Celect, Celect Plus, ISX, ISM and Dodge 5.9 units.

Talk to a Cummins ECM specialist

Call 726-999-0231 or contact us with your part number. Official Cummins information is at cummins.com.

See all ECM guides

Not sure which ECM you need?

Send us your engine model and serial number, or the part number on your ECM, and we'll tell you whether to repair or replace it, and what it costs.