Description
The C7 WAX Cat ECM is a remanufactured engine control module for Caterpillar C7 engines with the serial prefix WAX and SAP. It replaces part numbers 240-5302 and 196-4170, ships pre-programmed to your engine serial number and is tested before it leaves our shop in Fort Worth, Texas.
This page covers the part numbers this C7 WAX Cat ECM fits, how we program it, the signs that point to a failing C7 ECM, and how ordering, shipping, the core and the warranty work.
On this page
C7 WAX Cat ECM part numbers and fit
Before you order, match one of two things: the part number on your old ECM’s label, or the serial prefix (the first three characters of your engine serial number). This listing is for WAX and SAP engines and these part numbers:
| Part number | Where you find it |
|---|---|
| 240-5302 | On the original Caterpillar label |
| 196-4170 | On the original Caterpillar label |
SAP-prefix C7 engines use the same part number 240-5302. Tell us your full engine serial number and we confirm the fit before the unit ships.
This C7 WAX Cat ECM is a 70-pin unit (ADEM 3 style): two connectors with 70 pins each. Count the pins on your old ECM: if it has 40-pin connectors it is an older generation, so call us before you order.
Can’t read the label? The engine serial number is on the engine information plate: see how to find your engine serial number. Our ECM part number lookup lists every Caterpillar ECM we stock, and the full range is in Caterpillar ECMs.
About the Caterpillar C7 engine
The Caterpillar C7 is a 7.2-liter inline-six that replaced the 3126 in 2003. You find it in medium-duty trucks, buses, fire trucks and diesel motorhomes. WAX is one of its serial prefixes, and our interchange list shows the same 240-5302 unit on C7 engines with the SAP prefix.
The prefix matters because Caterpillar used several ECM part numbers across the C7 years. Matching both the prefix and the number on your old unit’s label is the fastest way to get the right ECM the first time. More background: Caterpillar 3126 and C7 history.
Pre-programmed to your engine
Every C7 WAX Cat ECM is programmed for your truck before it ships, so it can go in plug and play. Put these details in the order notes at checkout, or send them on our repair and programming form:
- Engine serial number (ESN), the most important one
- VIN of the truck or machine
- Tire size and rear axle gear ratio, for the speedometer and road speed limit
- Coolant level sensor and oil level sensor: yes or no
- Horsepower rating you want
Prefer the factory settings? Write “factory settings” in the notes and we program the standard Caterpillar values for your engine serial number. Want more power at the same time? Add our Caterpillar ECM tune service. More on how this works: ECM programming.
Signs your Cat C7 ECM is failing
- Cranks but won’t start, with good batteries and fuel.
- No communication with Cat ET or your scan tool.
- Stalls or shuts down while driving, or drops into a derate for no clear reason.
- ECM fault codes that come back after the wiring and sensors check out.
- Problems right after a jump start, welding on the truck or water in the connectors.
Rule out the cheap things first: batteries, grounds, fuses and the harness. Our guide to bad ECM symptoms walks you through each check before you spend money on a new unit.
Replace or repair your C7 WAX Cat ECM?
| Option | Price | Best when |
|---|---|---|
| Remanufactured replacement (this listing) | $1,199.00 | You need the truck running fast, or your unit is burned, wet or cracked |
| Repair your original ECM | $619.99 | The unit is repairable and the truck can wait a few days |
| Diagnostic only | $149 | We find no fault, or the unit can’t be repaired |
A repair keeps your original unit and its programming. For this unit that is our Caterpillar ECM repair service (70 pin); we also repair 40-pin Caterpillar ECMs; see our ECM repair service for how a mail-in repair works.
How ordering works
- Check the part number or serial prefix against the list above. Not sure? Call 726-999-0231 or send us your part number.
- Order online and put your engine serial number and settings in the order notes.
- We program and test your C7 WAX Cat ECM, then ship it with free UPS shipping in the US and a tracking number. Next-day shipping is available on request.
- Have the ECM installed by a professional technician.
Shipping, returns and warranty
- Warranty: 1 year on the remanufactured unit (see our warranty). Labor and downtime are not covered.
- Shipping insurance: every C7 WAX Cat ECM ships with $100 of insurance for free; ask us if you want a higher value.
- Returns: free cancellation while the unit is not installed and its seal is intact; you pay the shipping back. Details: returns.
- Core: the spec list shows a core value of $400 for this unit. Call us before you send your old ECM back and we explain the core refund for your order.
- International orders: import fees are not included.
Frequently asked questions
Does this ECM fit a C7 with the SAP prefix?
Yes. Our interchange list shows part number 240-5302 for both WAX and SAP C7 engines. Send us your engine serial number with the order and we program the unit for that engine.
Does the C7 WAX Cat ECM come programmed?
Yes. We program it for your engine serial number before it ships, with the factory settings or the settings you send us. In most trucks it then goes in plug and play.
How do I know this ECM fits my engine?
Match the serial prefix (WAX and SAP) or one of the part numbers above. When in doubt, send us your engine serial number and a photo of the old label and we confirm the fit before we ship.
Order your C7 WAX Cat ECM from 1EngineControl
Every unit is remanufactured, programmed and tested in Fort Worth, Texas, and backed by a 1-year warranty. Questions about fit or programming? Call 726-999-0231 or read our FAQ.



Reviews
Bought this? Be the first to review it.