Search Catalog

Mail-in repair service

Caterpillar ECM Repair 120 Pin

Part # 422-2302 292-9610 303-2384 10R6199 488-4879 372-2912 262-2881 10R5649

$699.00

Caterpillar ECM repair 120 pin: mail-in repair for Cat ECMs with a 120-pin connector. We repair your own unit, test it and ship it back, programming kept.

  • Return shipping included
  • $149 test fee only if it can’t be repaired or has no fault
  • 1-year warranty on the repair

Specs

Part number
Caterpillar ECMs with a 120-pin connector
Service
Mail-in repair, Fort Worth, TX
Warranty
1 Year
Turnaround
1-3 Days

We repair Caterpillar ECM units with part numbers 422-2302, 292-9610, 303-2384, 10R6199, 488-4879, 372-2912, 262-2881 and 10R5649. Not sure it’s yours? Compare the number on your ECM’s label with our part number list.

Description

Caterpillar ECM repair 120 pin is our mail-in repair for Cat ECMs with a 120-pin connector. You send us your original unit; we test it, repair it, test it again and ship it back, with return shipping included and a 1-year warranty on the repair.

Because we repair your own ECM, the programming stays in place and in most trucks it goes back in plug and play. This page shows how to tell a 120-pin unit from the 40-pin and 70-pin ones, what the repair costs and how the mail-in process works.

Is your ECM a 120 pin Cat ECM?

Caterpillar ECMs come in three connector styles, and each has its own repair listing. Count the pins on the large connectors of your unit:

Connector on your ECM Repair listing Price
120-pin connector Caterpillar ECM repair 120 pin (this listing) $699.00
2 plugs, 70 pins each Caterpillar ECM repair service (70 pin) $619.99
2 plugs, 40 pins each Caterpillar ECM repair 40 pin $699.99

120-pin units are the newer ADEM 4 style, with a 120-pin and a 70-pin connector. Part numbers we see include 422-2302, 292-9610, 303-2384 and 10R6199 (C13 LEE, C15 SDP and C7 C7S engines), 488-4879 and 372-2912 (C7), and 262-2881 / 10R5649 (twin-turbo C15 ACERT, prefixes MXS and NXS).

Not sure which one you have? Send a photo of the unit and its label, or call 726-999-0231, and we’ll tell you before you ship.

120 pin Cat ECM repair cost

  • Repair: $699.00, return shipping in the US included.
  • Test fee: $149 if the unit can’t be repaired or we find no fault.
  • Shipping to us: paid by you, with any carrier.
  • Optional tune: add the Caterpillar ECM tune service while the unit is here.

We don’t diagnose over the phone: the unit has to be on our bench before we can say whether it can be repaired.

How the Caterpillar ECM repair 120 pin process works

  1. Order this repair online. At the end of checkout you get an invoice: print it.
  2. Pack the ECM with the invoice and your contact details in the box. Our printable repair form has room for the engine serial number and notes.
  3. Ship it to: Repair Department, 9317 Jacksboro Hwy, Fort Worth, Texas 76135.
  4. We test and repair the unit, with a 1-3 day turnaround once it arrives.
  5. We ship it back with tracking, return shipping included.

How mail-in repairs work for every brand: ECM repair service.

Check these before you pull the ECM

  • Batteries and grounds: low voltage or a poor ground can look exactly like a dead ECM.
  • Fuses and ECM power at the connector.
  • The harness: chafed wires, corrosion or water in the connectors.
  • Fault codes that point to a sensor rather than the ECM.

Our guide to bad ECM symptoms walks through each check, and 8 signs your Caterpillar ECM is failing covers the Cat-specific ones.

Repair or replace?

A repair is usually the better deal when the unit is not burned, cracked or flooded and the truck can wait a few days: you keep your own programming and pay less. A remanufactured replacement is better when the unit is physically damaged or the truck has to run now. Look up the number on your label in our ECM part number list or browse Caterpillar ECMs.

Background reading: this overview of engine control units, and how a Caterpillar ECM works.

Warranty

  • 1-year warranty on the repair: see our warranty.
  • Labor and downtime costs are not covered.
  • The ECM should be installed by a professional technician.

Frequently asked questions

How long does a 120-pin Cat ECM repair take?

Our turnaround is 1-3 days once the unit arrives, then it ships back with tracking. Add the transit time both ways to plan your downtime.

Will the ECM need programming after the repair?

Usually not. We repair your own unit, so its programming stays in place and it goes back in plug and play in most trucks.

What if my ECM can’t be repaired?

We call you. You can have it sent back for the $149 test fee, or we offer a remanufactured replacement programmed for your engine.

Get your 120-pin Cat ECM repaired by 1EngineControl

Our Caterpillar ECM repair 120 pin service is done in-house in Fort Worth, Texas, with return shipping included and a 1-year warranty. Questions? Call 726-999-0231, read the FAQ or contact us.

Reviews

Bought this? Be the first to review it.

Write a review

Your email address will not be published. Required fields are marked *