Search Catalog

Diesel Truck Accessories: What’s Worth Buying (and What Can Hurt Your ECM)

, 3 min read

Diesel Truck Accessories: What's Worth Buying (and What Can Hurt Your ECM)

The right diesel truck accessories make the job safer, easier and cheaper to run. The wrong ones, badly wired, can drain batteries, cause electrical faults and even damage your engine computer.

This guide covers 8 of the best semi truck accessories worth buying, 3 to avoid, how to wire truck electronics safely, and where to spend your money first.

8 best diesel truck accessories

  1. Boost and exhaust temperature gauges: help you see a turbo or fuel problem before it becomes a breakdown.
  2. Battery monitor or voltmeter: warns you of a weak battery or charging fault, one of the most common causes of electrical trouble.
  3. Quality jump pack: a proper booster is safer for the electronics than jumping from another running vehicle.
  4. Surge-protected power inverter: correctly fused and wired, it powers cab electronics without spikes.
  5. Dash camera: protects you in disputes and accidents.
  6. Tire pressure monitoring: catches slow leaks and saves fuel.
  7. Bluetooth diagnostic adapter: lets you read engine fault codes on a phone or tablet.
  8. Good LED work lights: safer inspections and coupling at night.

3 accessories to avoid

  • Cheap “power boxes” or chips that alter sensor signals to the ECM. They can cause fault codes, derates and engine damage, and may break emissions rules.
  • Poorly made inverters and chargers without proper fusing. They can create voltage spikes and drain batteries.
  • Accessories spliced into ECM or sensor wiring. Tapping into engine harness wires can corrupt signals and damage the ECM.

We regularly see engine computers damaged by accessories wired into the wrong circuits. Our article on what causes ECM failure explains why.

Wiring accessories safely

  • Power accessories from a dedicated fused circuit or a proper accessory panel, never from engine or ECM wiring.
  • Use the right wire gauge and a fuse close to the power source.
  • Ground to a clean, solid chassis point or the accessory ground stud.
  • Route wires away from heat, sharp edges and moving parts, and secure them with clips.
  • Disconnect the batteries before making connections.

Good wiring protects your truck electronics, from the radio to the ECM. Our ECM maintenance guide covers grounds and batteries.

Where to spend first

If your budget is limited, start with the accessories that prevent breakdowns: a battery monitor, a quality jump pack and a diagnostic adapter. They pay for themselves the first time they help you avoid a tow.

Then add gauges and tire monitoring for efficiency, and comfort items last. For maintenance that protects the truck, see our semi truck maintenance checklist.

Protecting truck electronics on the road

Modern trucks carry several computers: the engine ECM, the transmission and brake controllers, the dash and telematics units. All of them depend on clean, steady voltage. Diesel truck accessories that draw heavy current, such as inverters and coolers, should have their own fused supply from the battery, not a tap into an existing circuit.

If you add several accessories, consider a dedicated power distribution block with individual fuses. It keeps wiring tidy, makes faults easy to find and protects the truck electronics that keep the engine running.

Frequently asked questions

What are the most useful diesel truck accessories?

Gauges, a battery monitor, a jump pack, a diagnostic adapter, tire pressure monitoring and a dash camera.

Can accessories damage my ECM?

Yes, if they are spliced into engine wiring or cause voltage spikes. Wire them to separate fused circuits.

Are performance chips worth it?

Most cause more problems than they solve. A proper ECM tune is safer. See Cummins ECM tuning.

What jump starter is best for a semi?

One rated for heavy-duty 12-volt diesel starting, used with correct polarity.

Need help with truck electronics?

Call 726-999-0231 or contact us. Federal safety rules for trucks are published by the FMCSA.

See all ECM guides

Not sure which ECM you need?

Send us your engine model and serial number, or the part number on your ECM, and we'll tell you whether to repair or replace it, and what it costs.