Need ECM repair Dallas truckers can count on? 1EngineControl repairs heavy-duty truck engine computers in our own shop on Jacksboro Highway in Fort Worth, Texas, serving truckers and fleets across the Dallas-Fort Worth area and the rest of Texas.
This page explains our local ECM repair service, the ECMs we repair, how to drop off or ship your unit, turnaround and prices, and how we serve customers across Texas.
In this guide
ECM repair Dallas and Fort Worth: local service
For ECM repair Dallas and Fort Worth truckers can reach quickly, a local specialist means less shipping time and a real person you can talk to. Our repair department is at:
1EngineControl Repair Department
9317 Jacksboro Hwy
Fort Worth, Texas 76135
Phone: 726-999-0231
For ECM repair Fort Worth customers can drop off, we are a specialist ECM shop rather than a general truck repair shop: we diagnose, repair, program and test engine computers every day. For truck ECM work in Dallas, Fort Worth, Arlington, Denton, Weatherford and the surrounding area, that means fewer days off the road.
ECMs we repair
- Caterpillar: 40-pin and 70-pin ECMs for the 3126, 3176, 3406E, C7, C9, C10, C11, C12, C13 and C15.
- Cummins: ISX and ISM (CM570, CM870, CM871, CM875, CM876), Celect and Celect Plus (N14, M11, L10) and Dodge 5.9 ECMs from 1998 to 2007.
- Detroit Diesel: DDEC III, IV and V ECMs on the Series 60.
We also program ECMs and sell remanufactured units pre-programmed to your engine serial number. See our ECM programming service and ECMs for sale.
Drop off or ship
Drop off: if you are in the Dallas-Fort Worth area, call ahead on 726-999-0231 to arrange a drop-off. Bring the ECM with your contact details, the engine serial number and a note on the symptoms.
Ship: from anywhere in Texas or the US, pack the ECM well with the connectors covered and ship it to the address above. We email you when it arrives. See our guide to mail-in vs local ECM repair.
Turnaround and prices
Most ECM repairs are finished within 1 to 3 days of the unit arriving. On our price list (November 2026):
| ECM | Repair price |
|---|---|
| Cummins ISX / ISM, Dodge 5.9 | $399.99 |
| Cummins Celect / Celect Plus | $499.99 |
| Detroit DDEC III, IV, V | $499.99 |
| Caterpillar 70-pin | $619.99 |
| Caterpillar 40-pin | $699.99 |
Every repair has a 1-year warranty. If we test the ECM and find nothing wrong, you pay only the $149 diagnostic fee. Browse our ECM repair services.
Serving all of Texas
For ECM repair Texas-wide, we repair ECMs for truckers and fleets in Houston, San Antonio, Austin, El Paso, Lubbock, Amarillo and across Texas. Overnight shipping within the state usually means your ECM reaches us the next day, and return shipping includes $100 of insurance.
Before you send the ECM, check batteries, grounds and connectors. Our truck ECM diagnosis guide shows how.
Why truckers choose a local specialist
- Engine computers are all we do, so common faults are fixed quickly.
- Every ECM is bench-tested before and after the repair.
- Your original programming stays in place, so the unit goes back in plug and play.
- You can call and talk to the people working on your ECM.
Read what other customers say on our reviews page.
Tips for Dallas-Fort Worth fleets
Local fleets get the most from a nearby shop by planning ahead. Keep the ECM part number and engine serial number for every truck on file, and call us as soon as a truck shows ECM symptoms. If you run several trucks with the same engine, a repaired spare ECM on the shelf turns a breakdown into a one-hour swap.
When you need ECM repair Dallas-area customers can schedule, call before you drive over so we can be ready for your unit.
Frequently asked questions
Where is your ECM repair shop?
9317 Jacksboro Hwy, Fort Worth, Texas 76135. Call 726-999-0231 before visiting.
How fast is ECM repair in Dallas-Fort Worth?
Most repairs take 1 to 3 days after the ECM reaches our shop.
Do you program ECMs in Fort Worth?
Yes. We program Cummins and Caterpillar ECMs and supply pre-programmed replacements.
Do you come to my truck?
We are a shop-based service. You or your mechanic remove the ECM and drop it off or ship it to us.
Contact our Fort Worth shop
Call 726-999-0231 or contact us with your ECM part number. Commercial drivers can find federal rules and resources on the FMCSA website.